{"id":7193,"date":"2025-09-05T12:33:57","date_gmt":"2025-09-05T12:33:57","guid":{"rendered":"https:\/\/www.buildsoft.eu\/?p=7193"},"modified":"2026-07-31T12:19:31","modified_gmt":"2026-07-31T12:19:31","slug":"common-mistakes-in-concrete-steel-and-timber-calculations","status":"publish","type":"post","link":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/","title":{"rendered":"Common Mistakes in Concrete, Steel and Timber Calculations"},"content":{"rendered":"\n<p>Most structural calculation errors trace back to a handful of recurring habits: boundary conditions that don&#8217;t match the real site conditions, reused old models nobody fully rechecked, missed or misapplied Eurocode load combinations, material behavior (cracking, creep, imperfections) that gets underestimated, and calculations that are correct but too opaque for anyone else to verify. Each is avoidable with the right checks and the right software.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">1. Incorrect or missing boundary conditions<\/h2>\n\n\n\n<p>One of the most common mistakes in concrete, steel and timber calculations is incorrectly defining boundary conditions in the calculation model. This includes how beams are supported or how columns are fixed at the base. If these conditions don\u2019t match the actual situation on site, the entire calculation may be off, even if the rest of the model is accurate.<\/p>\n\n\n\n<p>Boundary conditions determine how forces are transferred and how elements behave. Always make sure your supports and connections in the model reflect the actual design and execution plans.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">2. Copying old calculations<\/h2>\n\n\n\n<p>Reusing previous concrete, steel and timber calculations might seem convenient, but it often leads to mistakes. Old models may contain input that no longer applies to the new project. Changes in dimensions, loads or support types are easily overlooked. The use of outdated standards may also remain in place without being noticed.<\/p>\n\n\n\n<p>Use previous work only as a reference, and always perform a full check of all input values and calculation settings.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">3. Applying incorrect safety factors &amp; load combinations<\/h2>\n\n\n\n<p>Another common mistake is the incorrect application of load safety factors and load combination factors. Both lead to wrong load combinations. The Eurocode provides clear guidelines on how to combine various loads, such as self-weight, snow and wind. In practice, some combinations are sometimes forgotten or misapplied, leading to either overestimation or underestimation of the real loads and therefore unreliable results.<\/p>\n\n\n\n<p>Using software that automatically generates correct Eurocode-compliant combinations greatly reduces the risk of such errors.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">4. Underestimating material behaviour<\/h2>\n\n\n\n<p>Concrete, steel and timber each respond differently to loading. Concrete, for example, will almost always crack, leading to additional deformation. Both concrete and timber, are sensitive to creep: a deformation that gradually develops under constant load. Think of a wooden beam supporting a ceiling for years. Over time, it will slowly bend, even if the load doesn\u2019t change.&nbsp;<\/p>\n\n\n\n<p>Steel structures, on the other hand,&nbsp; are sensitive to imperfections, even minor imperfections in the shape or dimensions of steel elements can significantly affect their stability, especially under compressive or bending loads.<\/p>\n\n\n\n<p>It\u2019s important to take this particular&nbsp; material behaviour into account in every calculation, especially for long-term loads or slender structures.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">5. Lack of transparency<\/h2>\n\n\n\n<p>Calculations should not only be correct, but also clear and traceable. When you don\u2019t explain which loads are used, what verifications have been done or how connections are modelled, it\u2019s hard for others to spot mistakes or give useful feedback.<\/p>\n\n\n\n<p>Reliable software automatically generates clear calculation reports, helping you work more accurately, transparently and professionally.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"FAQ\">FAQ<\/h2>\n\n\n<div class=\"wp-block-uagb-faq uagb-faq__outer-wrap uagb-block-fe71c529 uagb-faq-icon-row uagb-faq-layout-accordion uagb-faq-expand-first-true uagb-faq-inactive-other-true uagb-faq__wrap uagb-buttons-layout-wrap uagb-faq-equal-height     \" data-faqtoggle=\"true\" role=\"tablist\"><script type=\"application\/ld+json\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@type\":\"FAQPage\",\"@id\":\"https:\\\/\\\/www.buildsoft.eu\\\/en\\\/common-mistakes-in-concrete-steel-and-timber-calculations\\\/\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Can reusing an old calculation model ever be safe?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Only as a starting reference, never as a shortcut to skip verification. Even a proven old model can carry over dimensions, loads, or support conditions that don't match the new project, or standards that have since been updated. Treat it as a template to check against, not a calculation to trust as-is.\"}},{\"@type\":\"Question\",\"name\":\"Does structural analysis software actually prevent these mistakes, or just speed up the work?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both. Software like Diamonds generates Eurocode-compliant load combinations automatically (removing the risk of a forgotten or misapplied combination), models material behavior like concrete cracking and creep by default, and produces a clear, traceable calculation report as a side effect of the calculation itself, rather than something you have to build separately.\"}},{\"@type\":\"Question\",\"name\":\"Which of these mistakes causes the most damage in practice?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Incorrect boundary conditions tend to be the most consequential, since they can throw off the entire force distribution in a model even when every other input is correct, and the error isn't always obvious from the output alone. It's also one of the easiest to miss, since it depends on matching the model to the real, physical connection details rather than a value you'd typically double-check.\"}}]}<\/script><div class=\"wp-block-uagb-faq-child uagb-faq-child__outer-wrap uagb-faq-item uagb-block-09dad7e6 \" role=\"tab\" tabindex=\"0\"><div class=\"uagb-faq-questions-button uagb-faq-questions\">\t\t\t<span class=\"uagb-icon uagb-faq-icon-wrap\">\n\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewBox= \"0 0 448 512\"><path d=\"M432 256c0 17.69-14.33 32.01-32 32.01H256v144c0 17.69-14.33 31.99-32 31.99s-32-14.3-32-31.99v-144H48c-17.67 0-32-14.32-32-32.01s14.33-31.99 32-31.99H192v-144c0-17.69 14.33-32.01 32-32.01s32 14.32 32 32.01v144h144C417.7 224 432 238.3 432 256z\"><\/path><\/svg>\n\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t<span class=\"uagb-icon-active uagb-faq-icon-wrap\">\n\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewBox= \"0 0 448 512\"><path d=\"M400 288h-352c-17.69 0-32-14.32-32-32.01s14.31-31.99 32-31.99h352c17.69 0 32 14.3 32 31.99S417.7 288 400 288z\"><\/path><\/svg>\n\t\t\t\t\t\t\t<\/span>\n\t\t\t<span class=\"uagb-question\">Can reusing an old calculation model ever be safe?<\/span><\/div><div class=\"uagb-faq-content\"><p>Only as a starting reference, never as a shortcut to skip verification. Even a proven old model can carry over dimensions, loads, or support conditions that don&#8217;t match the new project, or standards that have since been updated. Treat it as a template to check against, not a calculation to trust as-is.<\/p><\/div><\/div><div class=\"wp-block-uagb-faq-child uagb-faq-child__outer-wrap uagb-faq-item uagb-block-180aeaf3 \" role=\"tab\" tabindex=\"0\"><div class=\"uagb-faq-questions-button uagb-faq-questions\">\t\t\t<span class=\"uagb-icon uagb-faq-icon-wrap\">\n\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewBox= \"0 0 448 512\"><path d=\"M432 256c0 17.69-14.33 32.01-32 32.01H256v144c0 17.69-14.33 31.99-32 31.99s-32-14.3-32-31.99v-144H48c-17.67 0-32-14.32-32-32.01s14.33-31.99 32-31.99H192v-144c0-17.69 14.33-32.01 32-32.01s32 14.32 32 32.01v144h144C417.7 224 432 238.3 432 256z\"><\/path><\/svg>\n\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t<span class=\"uagb-icon-active uagb-faq-icon-wrap\">\n\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewBox= \"0 0 448 512\"><path d=\"M400 288h-352c-17.69 0-32-14.32-32-32.01s14.31-31.99 32-31.99h352c17.69 0 32 14.3 32 31.99S417.7 288 400 288z\"><\/path><\/svg>\n\t\t\t\t\t\t\t<\/span>\n\t\t\t<span class=\"uagb-question\">Does structural analysis software actually prevent these mistakes, or just speed up the work?<\/span><\/div><div class=\"uagb-faq-content\"><p>Both. Software like Diamonds generates Eurocode-compliant load combinations automatically (removing the risk of a forgotten or misapplied combination), models material behavior like concrete cracking and creep by default, and produces a clear, traceable calculation report as a side effect of the calculation itself, rather than something you have to build separately.<\/p><\/div><\/div><div class=\"wp-block-uagb-faq-child uagb-faq-child__outer-wrap uagb-faq-item uagb-block-60b2b444 \" role=\"tab\" tabindex=\"0\"><div class=\"uagb-faq-questions-button uagb-faq-questions\">\t\t\t<span class=\"uagb-icon uagb-faq-icon-wrap\">\n\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewBox= \"0 0 448 512\"><path d=\"M432 256c0 17.69-14.33 32.01-32 32.01H256v144c0 17.69-14.33 31.99-32 31.99s-32-14.3-32-31.99v-144H48c-17.67 0-32-14.32-32-32.01s14.33-31.99 32-31.99H192v-144c0-17.69 14.33-32.01 32-32.01s32 14.32 32 32.01v144h144C417.7 224 432 238.3 432 256z\"><\/path><\/svg>\n\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t<span class=\"uagb-icon-active uagb-faq-icon-wrap\">\n\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewBox= \"0 0 448 512\"><path d=\"M400 288h-352c-17.69 0-32-14.32-32-32.01s14.31-31.99 32-31.99h352c17.69 0 32 14.3 32 31.99S417.7 288 400 288z\"><\/path><\/svg>\n\t\t\t\t\t\t\t<\/span>\n\t\t\t<span class=\"uagb-question\">Which of these mistakes causes the most damage in practice?<\/span><\/div><div class=\"uagb-faq-content\"><p>Incorrect boundary conditions tend to be the most consequential, since they can throw off the entire force distribution in a model even when every other input is correct, and the error isn&#8217;t always obvious from the output alone. It&#8217;s also one of the easiest to miss, since it depends on matching the model to the real, physical connection details rather than a value you&#8217;d typically double-check.<\/p><\/div><\/div><\/div>\n\n\n<h3 class=\"wp-block-heading\">Next step<\/h3>\n\n\n\n<p>Want software that models cracking, creep and Eurocode load combinations correctly by default? <a href=\"https:\/\/www.buildsoft.eu\/en\/trial\">Try Diamonds free for 30 days<\/a>, fully functional, no obligation.<\/p>\n\n\n\n<p><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Most structural calculation errors trace back to a handful of recurring habits: boundary conditions that don&#8217;t match the real site [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":7238,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-gradient":""}},"_jet_sm_ready_style":"","_jet_sm_style":"","_jet_sm_controls_values":"","_jet_sm_fonts_collection":"","_jet_sm_fonts_links":"","footnotes":""},"categories":[72],"tags":[],"class_list":["post-7193","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-structural-engineering"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v25.5 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Common Mistakes in Concrete, Steel and Timber Calculations | BuildSoft<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Common Mistakes in Concrete, Steel and Timber Calculations | BuildSoft\" \/>\n<meta property=\"og:description\" content=\"Most structural calculation errors trace back to a handful of recurring habits: boundary conditions that don&#8217;t match the real site [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\" \/>\n<meta property=\"og:site_name\" content=\"BuildSoft\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/StructuralAnalysisSoftware\" \/>\n<meta property=\"article:published_time\" content=\"2025-09-05T12:33:57+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-31T12:19:31+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"BuildSoft\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"BuildSoft\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\"},\"author\":{\"name\":\"BuildSoft\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#\/schema\/person\/3cb64b87bfc60897ac69e2912fc91390\"},\"headline\":\"Common Mistakes in Concrete, Steel and Timber Calculations\",\"datePublished\":\"2025-09-05T12:33:57+00:00\",\"dateModified\":\"2026-07-31T12:19:31+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\"},\"wordCount\":528,\"publisher\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg\",\"articleSection\":[\"Structural Engineering\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\",\"url\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\",\"name\":\"Common Mistakes in Concrete, Steel and Timber Calculations | BuildSoft\",\"isPartOf\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg\",\"datePublished\":\"2025-09-05T12:33:57+00:00\",\"dateModified\":\"2026-07-31T12:19:31+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage\",\"url\":\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg\",\"contentUrl\":\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg\",\"width\":1200,\"height\":800},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.buildsoft.eu\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Common Mistakes in Concrete, Steel and Timber Calculations\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#website\",\"url\":\"https:\/\/www.buildsoft.eu\/en\/\",\"name\":\"BuildSoft\",\"description\":\"Structural engineering software\",\"publisher\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.buildsoft.eu\/en\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#organization\",\"name\":\"BuildSoft\",\"url\":\"https:\/\/www.buildsoft.eu\/en\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2024\/05\/buildsoft-logo-structurally-loved-big-e1717406977624.png\",\"contentUrl\":\"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2024\/05\/buildsoft-logo-structurally-loved-big-e1717406977624.png\",\"width\":9732,\"height\":3584,\"caption\":\"BuildSoft\"},\"image\":{\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/StructuralAnalysisSoftware\",\"https:\/\/www.linkedin.com\/company\/buildsoft\",\"https:\/\/www.youtube.com\/channel\/UCnGxgfJrvsL9ZEje-BvrdSg\",\"https:\/\/www.instagram.com\/buildsoft.eu\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#\/schema\/person\/3cb64b87bfc60897ac69e2912fc91390\",\"name\":\"BuildSoft\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.buildsoft.eu\/en\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/81e6ffdb158fef1cf85544cab007fa6f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/81e6ffdb158fef1cf85544cab007fa6f?s=96&d=mm&r=g\",\"caption\":\"BuildSoft\"},\"sameAs\":[\"https:\/\/structural-engineering-software.com\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Common Mistakes in Concrete, Steel and Timber Calculations | BuildSoft","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/","og_locale":"en_US","og_type":"article","og_title":"Common Mistakes in Concrete, Steel and Timber Calculations | BuildSoft","og_description":"Most structural calculation errors trace back to a handful of recurring habits: boundary conditions that don&#8217;t match the real site [&hellip;]","og_url":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/","og_site_name":"BuildSoft","article_publisher":"https:\/\/www.facebook.com\/StructuralAnalysisSoftware","article_published_time":"2025-09-05T12:33:57+00:00","article_modified_time":"2026-07-31T12:19:31+00:00","og_image":[{"width":1200,"height":800,"url":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg","type":"image\/jpeg"}],"author":"BuildSoft","twitter_card":"summary_large_image","twitter_misc":{"Written by":"BuildSoft","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#article","isPartOf":{"@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/"},"author":{"name":"BuildSoft","@id":"https:\/\/www.buildsoft.eu\/en\/#\/schema\/person\/3cb64b87bfc60897ac69e2912fc91390"},"headline":"Common Mistakes in Concrete, Steel and Timber Calculations","datePublished":"2025-09-05T12:33:57+00:00","dateModified":"2026-07-31T12:19:31+00:00","mainEntityOfPage":{"@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/"},"wordCount":528,"publisher":{"@id":"https:\/\/www.buildsoft.eu\/en\/#organization"},"image":{"@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage"},"thumbnailUrl":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg","articleSection":["Structural Engineering"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/","url":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/","name":"Common Mistakes in Concrete, Steel and Timber Calculations | BuildSoft","isPartOf":{"@id":"https:\/\/www.buildsoft.eu\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage"},"image":{"@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage"},"thumbnailUrl":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg","datePublished":"2025-09-05T12:33:57+00:00","dateModified":"2026-07-31T12:19:31+00:00","breadcrumb":{"@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#primaryimage","url":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg","contentUrl":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg","width":1200,"height":800},{"@type":"BreadcrumbList","@id":"https:\/\/www.buildsoft.eu\/en\/common-mistakes-in-concrete-steel-and-timber-calculations\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.buildsoft.eu\/en\/"},{"@type":"ListItem","position":2,"name":"Common Mistakes in Concrete, Steel and Timber Calculations"}]},{"@type":"WebSite","@id":"https:\/\/www.buildsoft.eu\/en\/#website","url":"https:\/\/www.buildsoft.eu\/en\/","name":"BuildSoft","description":"Structural engineering software","publisher":{"@id":"https:\/\/www.buildsoft.eu\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.buildsoft.eu\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.buildsoft.eu\/en\/#organization","name":"BuildSoft","url":"https:\/\/www.buildsoft.eu\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.buildsoft.eu\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2024\/05\/buildsoft-logo-structurally-loved-big-e1717406977624.png","contentUrl":"https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2024\/05\/buildsoft-logo-structurally-loved-big-e1717406977624.png","width":9732,"height":3584,"caption":"BuildSoft"},"image":{"@id":"https:\/\/www.buildsoft.eu\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/StructuralAnalysisSoftware","https:\/\/www.linkedin.com\/company\/buildsoft","https:\/\/www.youtube.com\/channel\/UCnGxgfJrvsL9ZEje-BvrdSg","https:\/\/www.instagram.com\/buildsoft.eu"]},{"@type":"Person","@id":"https:\/\/www.buildsoft.eu\/en\/#\/schema\/person\/3cb64b87bfc60897ac69e2912fc91390","name":"BuildSoft","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.buildsoft.eu\/en\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/81e6ffdb158fef1cf85544cab007fa6f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/81e6ffdb158fef1cf85544cab007fa6f?s=96&d=mm&r=g","caption":"BuildSoft"},"sameAs":["https:\/\/structural-engineering-software.com"]}]}},"uagb_featured_image_src":{"full":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg",1200,800,false],"thumbnail":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations-150x150.jpg",150,150,true],"medium":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations-300x200.jpg",300,200,true],"medium_large":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations-768x512.jpg",768,512,true],"large":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations-1024x683.jpg",1024,683,true],"1536x1536":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg",1200,800,false],"2048x2048":["https:\/\/www.buildsoft.eu\/wp-content\/uploads\/2025\/08\/common-mistakes-in-steel-timber-calculations.jpg",1200,800,false]},"uagb_author_info":{"display_name":"BuildSoft","author_link":"https:\/\/www.buildsoft.eu\/en\/author\/buildsoft\/"},"uagb_comment_info":1,"uagb_excerpt":"Most structural calculation errors trace back to a handful of recurring habits: boundary conditions that don&#8217;t match the real site [&hellip;]","_links":{"self":[{"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/posts\/7193","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/comments?post=7193"}],"version-history":[{"count":4,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/posts\/7193\/revisions"}],"predecessor-version":[{"id":8825,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/posts\/7193\/revisions\/8825"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/media\/7238"}],"wp:attachment":[{"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/media?parent=7193"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/categories?post=7193"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.buildsoft.eu\/en\/wp-json\/wp\/v2\/tags?post=7193"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}