Eurocode 2 second generation: Creep

At a glance

The new Eurocode 2 (G2, EN 1992-1-1:2023) predicts more long-term creep for a C25/30: the creep coefficient after 50 years rises from 2.69 to 2.90 (+7.8%). The model is rebuilt: G2 splits creep into a basic and a drying part. G2 gives less creep in the first years and more after decades. The effective modulus for long-term deflection changes too: G1 uses \frac {E_{cm}}{1 + \varphi}, G2 uses 1.05 \cdot \frac {E_{cm}}{1 + \varphi}. With the lower E_{cm} and the higher creep, it drops by 4%.

G1 vs G2 side by side

SymbolRuleG1 (2004)G2 (2023)
\varphiCreep coefficient\varphi_0 \cdot \beta_c(t,t_0)
notional creep & time creep (B.1)
\varphi_{bc} \cdot \varphi_{dc}
basic + drying creep (B.5)
\varphiQuick method\varphi(\infty,t_0)}
Figure 3.1, final value
\varphi(50y,t_0)}
Table 5.2, value after 50 years
h_0 = h_nNotional sizeh_0 = \frac {2 \cdot A_c}{u}Unchanged
t_{0,adj}Cement class on age at loadingUnchanged, (B.9)Unchanged, (B.17)
k_{\sigma}Limit for linear creepk_{\sigma} = 0.45 \cdot f_{ck}(t_0)
non-linear above, (3.7)
k_{\sigma} = 0.40 \cdot f_{cm}(t_0)
non-linear from 0.4 to 0.6, (B.19)
E_cTangent modulus for creep strainE_c=1.05 \cdot E_{cm}
3.1.4(2)
Unchanged
5.1.5(1)
E_{c,eff}Effective modulus for long-term deflectionE_{c,eff}=\frac {E_{cm}}{1 + \varphi(\infty,t_0)}
(7.20)
E_{c,eff}=1.05 \cdot \frac {E_{cm}}{1 + \varphi(t,t_0)}
(9.1)

Worked example: C25/30, 300×400 mm

Assumptions: indoor, RH = 50\%, cement class N, loaded at t_0 = 28 days, value after 50 years (18 250 days), all faces exposed:

G1 (2004)G2 (2023)\Delta
f_{cm}= 25 + 8 = 33 MPaf_{cm}=33 MPa
h_0 = 2 \cdot 120000/1400 = 171 mm h_n = h_0 = 171 mm
\varphi_0 = 1.90 \cdot 2.92 \cdot 0.488 = 2.71\varphi_{bc} = 0.156 \cdot 10.0 = 1.56
\beta_c(t,t_0) = 0.992\varphi_{dc}= 3.083 \cdot 0.900 \cdot 0.488 \cdot 0.991 = 1.34
\varphi(50y,28d)} = 2.71 \cdot 0.992 = 2.69\varphi(50y,28d)} =1.56 + 1.34 = 2.90+7.8%
E_{cm} = 31.5 GPaE_{cm} =30.5 GPa
E_{c,eff} = \frac {31.5}{1 + 2.69} = 8.53 GPaE_{c,eff} = 1.05 \cdot \frac{30.5}{1 + 2.90} = 8.20 GPa-3.8%
EI_{eff}=13 641 kNm²EI_{eff}= 13 120 kNm²-3.8%

G2 gives less creep in the first years (−6.4% after 1 year, −0.2% after 10 years) and more after decades (+11.6% after 100 years), because basic creep keeps growing with ln(t).

What it means in practice

  • Long-term deflection: the effective modulus of this uncracked C25/30 member is 4% lower, so the long-term deflection under sustained load is about 4% higher. The formula looks unchanged, but G1 uses E_cm in (7.20) and G2 uses 1.05·E_cm in (9.1).
  • Time dependence: G1 gives a final value, G2 a value after 50 years that keeps growing slowly. For a design life over 50 years, use Annex B.
  • High stress: non-linear creep now starts at 0.40 f_cm(t_0) instead of 0.45 f_ck(t_0), which matters for highly stressed members such as prestressed precast elements.

Try it in Diamonds

Diamonds is BuildSoft’s 3D FEM structural analysis software, and you can learn it in under an hour. Start your free 30-day trial at buildsoft.eu.

Sources

Sources: EN 1992-1-1:2004, 3.1.4, 7.4.3(5) and Annex B (B.1 to B.10); EN 1992-1-1:2023, 5.1.5, 9.1(4), Table 5.2 and Annex B (B.5 to B.21). Figures calculated by hand from the formulas for A_c = 120 000 mm², u = 1 400 mm.

Scroll to Top