At a glance
The new Eurocode 2 (G2, EN 1992-1-1:2023) lowers
for a C25/30 from 31.5 to 30.5 GPa (-3.2%); the gap narrows with strength (-3.7% at C20/25, -0.8% at C60/75). The aggregate correction changes more: fixed percentages become a free factor
.
Current G1 vs new G2 side by side
| Symbol | Rule | current G1 (2004) | new G2 (2023) |
|---|---|---|---|
| Mean strength | [MPa] – table 3.1 | Unchanged | |
| Mean stiffness | [GPa] – 3.1.3(2) | [MPa] – 5.1.4(2) | |
| Aggregate factor | Limestone -10% Sandstone -30% Basalt +20% | 9 500 for quartzite 5 000 to 13 000 for others National Annex may fix it | |
| Tangent modulus | [GPa] – 3.1.4(2) | Unchanged Annex B (B.21) or tests also allowed |
Worked example: C25/30, 300×400 mm, quartzite aggregates
| current G1 (2004) | new G2 (2023) | |
|---|---|---|
| -3.2 % | ||
| -3.2 % |
G1 Table 3.1 rounds C25/30 to 31 GPa; against that value G2 is only -1.7%.
What it means in practice
- Deflections: about 3.3% more elastic deflection for an uncracked C25/30 member.
- Aggregates: the fixed -10% and -30% corrections are gone; check k_E in your National Annex.
- FEM: in an all-concrete model a uniform 3% drop scales displacements, not the force distribution.
Try it in Diamonds
Diamonds is BuildSoft’s 3D FEM structural analysis software, and you can learn it in under an hour. Start your free 30-day trial at buildsoft.eu.
Sources
Sources: EN 1992-1-1:2004, 3.1.3, 3.1.4 and Table 3.1; FprEN 1992-1-1:2023, 5.1.3 to 5.1.5 and Table 5.1.



