Eurocode 2 second generation: concrete stiffness (E_cm)

At a glance

The new Eurocode 2 (G2, EN 1992-1-1:2023) lowers E_{cm} for a C25/30 from 31.5 to 30.5 GPa (-3.2%); the gap narrows with strength (-3.7% at C20/25, -0.8% at C60/75). The aggregate correction changes more: fixed percentages become a free factor k_E.

Current G1 vs new G2 side by side

SymbolRulecurrent G1 (2004) new G2 (2023)
f_{cm}Mean strengthf_{cm}=f_{ck}+8MPa
[MPa] – table 3.1
Unchanged
E_{cm}Mean stiffnessE_{cm}= 22\cdot {(f_{cm}/10) }^{0.3}
[GPa] – 3.1.3(2)
E_{cm}= k_E\cdot {(f_{cm} )}^{1/3}
[MPa] – 5.1.4(2)
k_EAggregate factorLimestone -10%
Sandstone -30%
Basalt +20%
9 500 for quartzite
5 000 to 13 000 for others
National Annex may fix it
E_c, E_{c,28}Tangent modulusE_c= E_{c,28}=1.05 \cdot E_{cm}
[GPa] – 3.1.4(2)
Unchanged
Annex B (B.21) or tests also allowed

Worked example: C25/30, 300×400 mm, quartzite aggregates

current G1 (2004)new G2 (2023)\Delta
f_{cm}= 25 + 8 = 33 MPaf_{cm}=33 MPa
E_{cm}= 22 \cdot {(33/10) }^{0.3} = 31475 MPaE_{cm}= 9500 \cdot {(33 )}^{1/3} = 30472 MPa-3.2 %
I_y=\frac {b \cdot h^3}{12} =\frac {300 \cdot 400^3}{12} = 1.6 \cdot 10^9 mm^4I_y= 1.6 \cdot 10^9 mm^4
E_{cm}I=31475 \cdot 16 = 50 361 kNm²E_{cm}I=30472 \cdot 16 = 48 755 kNm²-3.2 %

G1 Table 3.1 rounds C25/30 to 31 GPa; against that value G2 is only -1.7%.

What it means in practice

  • Deflections: about 3.3% more elastic deflection for an uncracked C25/30 member.
  • Aggregates: the fixed -10% and -30% corrections are gone; check k_E in your National Annex.
  • FEM: in an all-concrete model a uniform 3% drop scales displacements, not the force distribution.

Try it in Diamonds

Diamonds is BuildSoft’s 3D FEM structural analysis software, and you can learn it in under an hour. Start your free 30-day trial at buildsoft.eu.

Sources

Sources: EN 1992-1-1:2004, 3.1.3, 3.1.4 and Table 3.1; FprEN 1992-1-1:2023, 5.1.3 to 5.1.5 and Table 5.1.

Scroll to Top